BMVMT - 3887, SODIUM SULFATE
- MSDS: BMVMT
- Manufacturer: J T BAKER INC
- Product Name: 3887, SODIUM SULFATE
- National Stock Number: 6810-00N028943
Product Identification
Product ID:3887, SODIUM SULFATE
MSDS Date:08/14/1987
FSC:6810
NIIN:00N028943
MSDS Number: BMVMT
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
1)
CAS: 7757-82-6
RTECS: WE1650000
Fraction By Weight: 90-100%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF DUST MAY CAUSE
IRRITATION TO UPPER RESPIRATORY TRACT. CONTACT WITH SKIN OR EYES
MAY CAUSE IRRITATION. INGESTION MAY CAUSE GASTROINTESTINAL
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:IF SWALLOWED AND CONSCIOUS, IMMEDIATELY GIVE LARGE AMOUNTS OF
WATER. GET MEDICAL ATTENTION. INHAL: IF PERS BREATHES IN LARGE
AMOUNTS, MOVE THE EXPOSED PERS TO FRESH AIR. GET MEDICAL ATTENTION.
EYE: IM MEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION. SKIN: IMMEDIATELY WASH WITH PLENTY
OF SOAP AND WATER FOR AT LEAST 15 MINUTES.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR
SURROUNDINNG FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC GASES PRODUCED: SULFUR DIOXIDE.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. CAREFULLY
SWEEP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHLTY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA. ISOLATE FROM
INCOMPATIBLE MATERIALS.
Other Precautions:MATERIAL IS HYGROSCOPIC. DURING USE AVOID CONTACT
WITH EYES, SKIN, CLOTHING. MAY CAUSE IRRITATION. MAY BE HARMFUL IF
INGESTED OR INHALED.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE AN
APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUME OR DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1623F,884C
Spec Gravity:2.68 (H2O=1)
Solubility in Water:APPRECIABLE (>10%)
Appearance and Odor:WHITE POWDER OR CRYSTALS; ODORLESS.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
ALUMINUM, MAGNESIUM, MINERAL ACIDS, STRONG ACIDS, STRONG BASES.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:SOX.
Disposal
Waste Disposal Methods:DISPOSE I/A/W ALL APPLICABLE FEDERAL, STATE AND
LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.